Automatic Pallet Cleaning Machine for Wave Soldering Pallet and Reflow Oven Condenser Chiller Clenaing Equipemnt BC220
BC210 Pallet Cleaning Machine for wave soldering pallet, reflow oven condensers chiller, claws, chains, filters and PCBA tooling. PLC control, water‑based chemcial liquid cleaning, full‑coverage spray, tape water / DI water rinse and hot‑air drying in one chamber. High efficiency, safe operation and long service life.
BC30 SMT Nozzle Cleaning Machine for Pick and Place Nozzle
BC30 Nozzle Cleaning Machine adopts a multi-nozzle atomized water jet cleaning method to thoroughly remove residual solder paste from nozzles. The equipment features fully automatic cleaning, capable of processing 30 nozzles per cycle. Different nozzle models are matched with corresponding fixture trays, enabling compatibility with nozzles of all placement machine models. After cleaning, the nozzles are automatically dried with compressed air.
BC410 SMT Squeegee Auto Cleaning Machine Solder Paste Squeegee Blade Cleaner
The BC410 Squeegee Cleaning Machine features an integrated ultrasonic and spray cleaning system. It follows a standard three-step workflow: washing with water-based solder paste cleaning fluid, rinsing with DI water, and hot air drying. Each batch can clean 6 to 12 squeegees efficiently.
During operation, the squeegees are securely mounted on a special synchronous rotating fixture. This rotating design ensures thorough cleaning of all surfaces, including squeegee gaps, fixture contact areas, and both ends, achieving dead-angle-free cleaning. The result is complete removal of solder paste residues, restoring the squeegees' accuracy for immediate reuse in production.
BC420 Customized Cleaning Machine for Automatic Solder Paste Feeding Device
The BC420 is professionally designed to clean automatic solder paste feeding devices.
During operation, the automatic solder paste feeding device is fixed onto a rotating bracket inside the cleaning chamber, which keeps rotating throughout the process.
Combining the physical force of ultrasonic vibration and high-pressure spraying, together with the chemical dissolving power of water-based solder paste cleaning solution, the BC420 decomposes and removes residual solder paste from surfaces, corners and narrow gaps of the feeding device until thoroughly clean.
After cleaning, rinse the unit with DI water or purified tap water, followed by hot air drying to completely eliminate remaining moisture on the device.
Electric SMT Stencil Cleaner | Automatic Solder Paste Stencil Cleaning Machine BC320
Fixture Cleaning Machine Automatic Wave Soldering Fixture Cleaner BC210
Pneumatic Dual Stencil Cleaner | Dual Chamber SMT Cleaning Machine BC310D
The BC310D is a pneumatic dual-chamber SMT stencil cleaning machine designed for high‑efficiency cleaning of solder paste and red glue stencils. With two independent cleaning systems, 1μm filtration, and fully pneumatic operation, it delivers maximum productivity, safety, and long-term reliability for SMT production lines.
✅ Dual independent cleaning systems clean 2 stencils simultaneously
✅ 100% pneumatic operation (no electricity required)
✅ 360° high-pressure spray cleaning system
✅ Compatible with solvent and water-based cleaning liquids
✅ Improve SMT printing quality & reduce defects
Pneumatic SMT Stencil Cleaner | Solder Paste Stencil Cleaning Machine BC310
The BC310 Pneumatic Stencil Cleaner is designed for fast, safe, and efficient cleaning of SMT stencils, removing solder paste and flux residue to ensure consistent printing performance and higher yield.
✅ 100% pneumatic operation (no electricity required)
✅ 360° high-pressure spray cleaning system
✅ Compatible with solvent and water-based cleaning liquids
✅ Improve SMT printing quality & reduce defects
